Does the Canon RF 100-400mm f/5.6-8 IS USM take a teleconverter?

Canon RF · 100-400mm f/5.6-8 · thread and mount data verified 2026-08-29

One teleconverter is supported. A teleconverter multiplies the focal length and costs you light — and on a crop body the framing multiplies again.

Read the restriction before you buy: AF at all zoom settings but AF-area coverage narrows to approx. 40% x 60%. That is a published limit, not a reviewer's opinion — the usable range with a converter fitted is narrower than the lens's own.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Affiliate links never affect our specs or which lenses we compare.

Teleconverter	Supported	Reach	Max aperture	On APS-C	On Micro Four Thirds
Canon RF Extender 2x	Partial — AF at all zoom settings but AF-area coverage narrows to approx. 40% x 60%.	200-800mm	f/11-16	320-1280mm	—

At f/11-16 autofocus is limited on many bodies (often centre-point only). Check your body's AF aperture limit.

What each converter gives you

Canon RF Extender 2x — 200-800mm at f/11-16 on this lens, autofocus retained.

The lens itself: Canon RF 100-400mm f/5.6-8 IS USM · every Canon RF lens: Canon RF lens index · all teleconverter compatibility

Compatibility sourced from the manufacturers' own published teleconverter compatibility statements (manufacturer teleconverter compatibility statements (Sony, Canon USA, Nikon, Fujifilm, Sigma, Panasonic, OM System) — each row carries its own source URL) and verified 2026-08-29. Reach and aperture figures are computed from the lens's own published focal length and maximum aperture — a 1.4x multiplies focal length by 1.4 and costs 1 stop; a 2x multiplies by 2 and costs 2 stops. Lenses whose compatibility we could not verify from a manufacturer statement are omitted rather than guessed. Methodology